top of page
Home Assistant Connect ZBT-1
Home Assistant Connect ZBT-1 is a universal Zigbee compatible USB adapter.
 
  • A future firmware update will bring Thread support, this allows Connect ZBT-1 to be used to connect to Thread-based Matter devices.
  • Easy way to add Zigbee support
  • Perfect match for Home Assistant users
  • Updates delivered via Home Assistant
  • Plug and Play

Home Assistant Connect ZBT-1 (Zigbee and Thread USB adapter)

ден2,990.00Price
Sales Tax Included

  • The Home Assistant Connect ZBT-1 is the easiest way to add Zigbee support to your Home Assistant instance.

     

    A future firmware update will bring Thread support; this allows Connect ZBT-1 to be used to connect to Thread-based Matter devices.

    Home Assistant Connect ZBT-1 is hardware-wise exactly the same device as Home Assistant SkyConnect. It's basically the same device with a different name. The only thing that will change is the logo on the product and packaging and the EAN code. Hardware and feature-wise it's 100% the same.

     

    The Home Assistant Connect ZBT-1 is compatible with the Raspberry Pi and other Home Assistant-supported Linux devices. The Home Assistant Connect ZBT-1 will allow you to easily set up and use Zigbee sensors and devices with your Home Assistant install, allowing even more automation and integration options for your home.

    The adapter uses the same Silicon Labs chip used in the Home Assistant Yellow device (Silabs EFR32MG21). A USB extension cable is included in the package to avoid interference caused by USB 3.0 ports.

     

    Features

    • Zigbee and Thread adapter - based on USB 2.0
    • Compatible - Zigbee Works with Home Assistant and Zigbee2MQTT
    • Future Proof - Updatable Updates delivered via Home Assistant
    • Over-The-Wire (OTW) - update support via USB
    • Reliable Range - +20 dBm
    • Zero Setup - Plug and Play Automatically detected by Home Assistant
    • Documentation - https://skyconnect.home-assistant.io/documentation/

    Why include a USB extension cable?

    USB 3.0 ports (the ones with blue on the inside) are known to cause significant noise and radio interference to any 2.4Ghz wireless devices. This includes Zigbee and Thread. If you do not use the extension cable, it may not work at all, and if it does, it could be flaky at best with intermittent problems (issues with pairing, device dropouts, unreachable devices, timeout errors, etc).

  • Components

    • Supply: 5V DC / up to 150mA
    • Radio Chipset: Silabs EFR32MG21
    • Frequency: 2.4GHz
    • TX Power: up to +20dBm
    • RX sensitivity: -104dBm (250kbps)
    • Antenna: PCB
    • Protocols: Zigbee 3.0, Thread (Matter)
    • USB: 2.0 full-speed (12Mbps), Silicon Labs CP2102N USB-to-UART bridge
    • Stack : EmberZNet serial protocol (EZSP)

    Form Factor

    • Width: 18 mm/0.7 inch
    • Height: 4.5 mm/1.4 inch
    • Depth: 38.5 mm/1.5 inch
    • Weight: 4 g/0.14 oz

    Package Contents

    • 1x Home Assistant Connect ZBT-1 USB Adapter
    • 1x USB extension cable
bottom of page